Posts for tag: orthodontic treatment
The straightening process for a crooked smile doesn't end when the braces come off. There's one more crucial phase to undergo to make sure we don't lose the progress you've achieved: wearing an orthodontic retainer.
Although often viewed as a nuisance, retainers are important because they prevent realigned teeth from reverting to their old positions. This is possible because the periodontal ligament, the gum attachment that allows us to move teeth in the first place, can contain “muscle memory” that naturally tries to draw teeth back to where they once were.
A retainer prevents this from happening: During wear the subtle pressure they exert keeps or “retains” the teeth in their new positions until they're firmly established, usually after several months. While most patients initially wear a retainer around the clock, this will gradually taper off until they're worn primarily during sleep hours.
While retainers come in many different styles and sizes, most fall into one of two categories: removable or non-removable (bonded). The first type, a custom-made appliance a patient can easily take in and out of the mouth, has its advantages. Removing it makes it easier to clean the teeth. They're also adaptable to reduced wear schedules for eating, brushing and flossing, or for special occasions.
But a removable retainer may be noticeable to others. Its removability can also lead to problems. Out of the mouth they're prone to be lost, resulting in additional replacement costs. And immature patients may be easily tempted to take them out too often—or not wear them at all.
A bonded retainer solves many of these potential problems. Because the retainer wire is securely bonded to the back of the teeth, it's not visible to others. And because it can't be removed except by an orthodontist, there's virtually no chance of losing it or haphazard wear.
On the other hand, bonded retainers can occasionally break, requiring repair or replacement. And flossing is more difficult than with a removable retainer, although a little training from a dental hygienist can make that easier.
The choice of retainer depends on the individual and their priorities. But whether removable or bonded, a retainer is absolutely essential for protecting your new, hard-earned smile.
If you would like more information on bonded retainers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Bonded Retainers.”
While crooked teeth are usually responsible for a malocclusion (poor bite), the root cause could go deeper: a malformed maxilla, a composite structure composed of the upper jaw and palate. If that’s the case, it will take more than braces to correct the bite.
The maxilla actually begins as two bones that fit together along a center line in the roof of the mouth called the midline suture, running back to front in the mouth. The suture remains open in young children to allow for jaw growth, but eventually fuses during adolescence.
Problems arise, though, when these bones don’t fully develop. This can cause the jaw to become too narrow and lead to crowding among the erupting teeth and a compromised airway that can lead to obstructive sleep apnea. This can create a cross-bite where the upper back teeth bite inside their lower counterparts, the opposite of normal.
We can remedy this by stimulating more bone growth along the midline suture before it fuses, resulting in a wider maxilla. We do this by installing a palatal expander, an appliance that incrementally widens the suture to encourage bone formation in the gap, which over time will widen the jaw.
An expander is a metal device with “legs” extending out on both sides and whose ends fit along the inside of the teeth. A gear mechanism in the center extends the legs to push against the teeth on both sides of the jaw. Each day the patient or caregiver uses a key to give the gear a quarter turn to extend the legs a little more and widen the suture gap. We remove the expander once the jaw widens to the appropriate distance.
A palatal expander is an effective, cost-efficient way to improve a bite caused by a narrow jaw, but only if attempted before the bones fuse. Widening the jaw after fusion requires surgery to separate the bones — a much more involved and expensive process.
To make sure your child is on the right track with their bite be sure to see an orthodontist for an evaluation around age 6. Doing so will make it easier to intervene at the proper time with treatments like a palatal expander, and perhaps correct bite problems before they become more expensive to treat.
If you would like more information on treating malocclusions, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Palatal Expanders: Orthodontics is more than just Moving Teeth.”
At any given time some 4 million teens and pre-teens are wearing braces or other orthodontic appliances to correct a malocclusion (poor bite). While most cases are straightforward, some have difficulties that increase treatment time and cost.
But what if you could reduce some of these difficulties before they fully develop? We often can through interceptive orthodontics.
This growing concept involves early orthodontic treatment around 6 to 10 years of age with the goal of guiding the development of a child’s jaws and other mouth structures in the right direction. These early years are often the only time of life when many of these treatments will work.
For example, widening the roof of the mouth (the palate) in an abnormally narrow upper jaw takes advantage of a gap in the bone in the center of the palate that doesn’t fuse until later in adolescence. A device called a palatal expander exerts outward pressure on the back teeth to influence the jawbone to grow out. New bone fills in the gap to permanently expand the jaw.
In cases with a developing overbite (the upper front teeth extending too far over the lower teeth when closed), we can install a hinged device called a Herbst appliance to the jaws in the back of the mouth. The hinge mechanism coaxes the lower jaw to develop further forward, which may help avoid more extensive and expensive jaw surgery later.
Interceptive treatments can also be fairly simple in design like a space retainer, but still have a tremendous impact on bite development. A space maintainer is often used when a primary (“baby”) tooth is lost prematurely, which allows other teeth to drift into the empty space and crowd out the incoming permanent tooth. The wire loop device is placed within the open space to prevent drift and preserve the space for the permanent tooth.
To take advantage of these treatments, it’s best to have your child’s bite evaluated early. Professional organizations like the American Association of Orthodontists (AAO) recommend a screening by age 7. While it may reveal no abnormalities at all, it could also provide the first signs of an emerging problem. With interceptive orthodontics we may be able to correct them now or make them less of a problem for the future.
If you would like more information on orthodontic treatments, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor article “Interceptive Orthodontics.”
Moving teeth through orthodontics may involve more than simply wearing braces. There are many bite conditions that require extra measures before, during or after traditional orthodontic treatment to improve the outcome.
One such measure is extracting one or more teeth. Whether or not we should will depend on the causes behind a patient's poor dental bite.
Here, then, are 4 situations where tooth extraction before orthodontics might be necessary.
Crowding. This happens when the jaw isn't large enough to accommodate all the teeth coming in. As a result, later erupting teeth could erupt out of position. We can often prevent this in younger children with space maintainers or a palatal expander, a device which helps widen the jaw. Where crowding has already occurred, though, it may be necessary to remove selected teeth first to open up jaw space for desired tooth movement.
Impacted teeth. Sometimes an incoming tooth becomes blocked and remains partially or fully submerged beneath the gums. Special orthodontic hardware can often be used to pull an impacted tooth down where it should be, but not always. It may be better to remove the impacted tooth completely, as well as its matching tooth on the other side of the jaw to maintain smile balance before orthodontically correcting the bite.
Front teeth protrusion. This bite problem involves front teeth that stick out at a more horizontal angle. Orthodontics can return the teeth to their proper alignment, but other teeth may be blocking that movement. To open up space for movement, it may be necessary to remove one or more of these obstructing teeth.
Congenitally missing teeth. The absence of permanent teeth that failed to develop can disrupt dental appearance and function, especially if they're near the front of the mouth. They're often replaced with a dental implant or other type of restoration. If only one tooth is missing, though, another option would be to remove the similar tooth on the other side of the jaw, and then close any resulting gaps with braces.
Extracting teeth in these and other situations can help improve the chances of a successful orthodontic outcome. The key is to accurately assess the bite condition and plan accordingly.
If you would like more information on orthodontic options, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Removing Teeth for Orthodontic Treatment.”
Sometimes you need only a single solution to improve your smile: teeth whitening to brighten stained teeth; porcelain veneers or crowns to mask dental flaws; or a life-like dental implant to replace a missing tooth. But not all dental situations are that simple and sometimes require a combination of treatments.
A case in point: restoring a missing tooth within a poor bite. The absent tooth itself may be the cause of the bite problem if it’s been missing for some time: The nearby teeth tend to move or “drift” into the empty space, leaving no room for implant placement.
When this happens, you’ll first need orthodontic treatment to correct the bite problem. Not only will this open the space for the implant, it also comes with its own benefits. It obviously improves your smile appearance—but straighter teeth are also easier to keep clean of bacterial plaque, which reduces your disease risk. You may also experience better digestion after your teeth are properly aligned and able to function as they should during eating.
The traditional way to improve a bite is through metal braces. But there are some downsides: For one, braces can make it difficult to keep teeth adequately clean, making wearers more susceptible to tooth decay and gum disease. Braces are also quite visible and can detract from a person’s appearance (even more so if a missing tooth is involved).
Unless your situation requires braces, you can choose clear aligners as an alternative. These clear, computer-generated plastic trays are worn in sequence to gradually move teeth to their desired positions. Unlike braces, you can remove aligners for eating, cleaning or rare special occasions. And, they’re barely noticeable to others.
If you also have a missing tooth, you can have a temporary prosthetic (“false”) tooth built into your aligner trays. In this way you can still enhance your smile while undergoing aligner treatment.
Once your bite has been corrected, we can then proceed with restoring your missing tooth permanently with a dental implant. Although orthodontics adds to the time and expense of restoration, its often necessary to achieve the best result. Your future smile will be the better for it.